USB stick/flash drive noise

Forums › Forums › Qu Forums › Qu troubleshooting › USB stick/flash drive noise

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 6 years, 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2018/01/14 at 11:48 am #68218
    Profile photo of MartinC
    MartinC
    Participant

    Hi,
    I am having a problem of noise (sounds like clicking) when recording onto a flash drive, I’ve tried re-formatting them and I got even more noise during the format. The drive has been used sucessfully in the past but this is new. I’ve seen the forum on computer connected issues, we are connected to a pc running windows 10 but that seems fine.
    Any ideas?
    Thanks.
    Martin.

    2018/01/14 at 12:01 pm #68219
    Profile photo of MarkPAman
    MarkPAman
    Participant

    Is the St3 analogue input turned up? That can pick up USB noise.

    2018/01/14 at 11:57 pm #68233
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Connect something to St3 normally prevents the pickup.

    It should be obvious on meters if that is the issue

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.