Time power on Gld80

Forums › Forums › GLD Forums › GLD troubleshooting › Time power on Gld80

Tagged: 

This topic contains 5 replies, has 3 voices, and was last updated by Profile photo of Jamabe Jamabe 7 years, 7 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2015/11/15 at 2:19 pm #52101
    Profile photo of Rorikx
    Rorikx
    Participant

    I have a problem with my GLD. With the latest update I have noticed that my GLD takes much longer to start than normal. Before he power on in about a minute, but after the last update takes about three minutes to boot. My GLD has about 3 years and it has never failed but I worry that something is not working well.

    Thanks

    2015/11/15 at 2:44 pm #52103
    Profile photo of GCumbee
    GCumbee
    Participant

    Check to see if DHCP is on. If you don’t need it turn it off. Always takes a long time if it is hunting for a connection.

    2015/11/15 at 11:40 pm #52120
    Profile photo of Rorikx
    Rorikx
    Participant

    I remember that the DHCP is off and have assigned a static IP, so I will review. I hope to be just that. Thanks for your quick response

    2015/11/16 at 1:23 am #52122
    Profile photo of GCumbee
    GCumbee
    Participant

    Ok. Mine scares me sometimes and takes forever to boot.

    2015/11/17 at 10:39 pm #52158
    Profile photo of Rorikx
    Rorikx
    Participant

    I made the test today and was activated dhcp, I’ve turned off and returned to start as usual. thanks for the help

    2016/09/03 at 10:03 am #57975
    Profile photo of Jamabe
    Jamabe
    Participant

    Our GLD80 also takes some minutes to boot.
    even if DHCP is on/off.

    Firmware 1.51

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.