Hi all, we are experiencing problems with both our T112 surfaces and wondering if anyone else has the same. When using the GEQ fader flip button the faders on the middle bank will go to random positions and will keep changing everytime you hit the button. The only way we can run these consoles now is to use the touchscreen only which is a pain when you have walk in engineers. We have had a lot of different issues with the T112s and have changed numerous PCBs,we also run R72s and have never had an issue with these. We have also noticed the faders slowing down over the last year or so, so we did a reset on all systems including the iDRs with the dip switched but this didn’t seem to change anything. Today I decided to reload back dated firmware to 1.72 and have noticed a huge difference in the speed of the faders when scrolling pages. Would it be a case of the console running out of processing power with all of the firmware updates over time? Unfortunately it has not changed my initial problem with the fader flip
