Splitting signals with Y cables for monitoring

Forums Forums Qu Forums Qu general discussions Splitting signals with Y cables for monitoring

This topic contains 19 replies, has 5 voices, and was last updated by Profile photo of Mike C Mike C 2 weeks, 4 days ago.

Viewing 5 posts - 16 through 20 (of 20 total)
  • Author
    Posts
  • #67851
    Profile photo of dmarin
    dmarin
    Participant

    @dick rees
    Thank you very very much i understand the way you “pan” and i will try it!
    Althought the “link” feature of mono mixes to stereo is essential for me and as a have seen is a request of many users of Qu family but unfortunatelly no response from A&H
    Thank you again!

    #67852
    Profile photo of Dick Rees
    Dick Rees
    Participant

    The capability you desire can be achieved with the desk as is as I have just demonstrated. Personally, there are other, more desirable features I’d rather A&H spend their time on rather than simply making tasks such as yours a tad simpler when there is an existing solution.

    I want DOWNWARD EXPANSION.

    #67860
    Profile photo of MarkPAman
    MarkPAman
    Participant

    Of course, all the rest of the Qu desks have groups, which can be run as additional stereo mixes.

    #67867
    Profile photo of Dick Rees
    Dick Rees
    Participant

    Excellent point, Mark.

    #67907
    Profile photo of Mike C
    Mike C
    Participant

    If you get a stage box like a AB168 in the IO set up you can route any input to any channel or channels on the mixer surface.

    Yea that would be an expensive Y cable but the stage box could be handy in it self.

Viewing 5 posts - 16 through 20 (of 20 total)

You must be logged in to reply to this topic.