Topic: Solo in place | Allen & Heath Digital Community

Solo in place

This topic contains 11 replies, has 7 voices, and was last updated by alex.abel 5 years, 3 months ago.

Viewing 12 posts - 1 through 12 (of 12 total)

Author

Posts
2017/05/29 at 5:30 pm #63640

Steph.plisson
Participant

Hi
Please make an solo in place option.
Soooooonnnnnnn!!!!

2017/05/31 at 3:32 pm #63669

mumu
Participant

yesss

2017/08/10 at 9:09 am #64746

Starsky
Participant

Output from monitor bus instead of L&R then use PFL?

2017/08/10 at 9:58 am #64747

Steph.plisson
Participant

Just have the option with or without Solo in place in the menu , then when you are in linechek , you can isolate the selected Chanel in your headphone or master except the fx return still in isolate
Hope soon ….
Just like on all the other desk in the world !!!!😂😂😂 you are so good … I can’t believe that you don’t have this and the simple midi pgm change in the scene menu …
Please

2018/10/22 at 8:28 pm #79474

mixJM
Participant

Is solo in place still not available?

2018/12/28 at 6:07 pm #81121

mixJM
Participant

Any news on the possibility of SIP appearing in a future update? It’s such a basic function, crucial to an effective virtual soundcheck.

2018/12/29 at 4:54 am #81130

Loloverde
Participant

As a workaround you can patch the IEM output to the PA for the virtual soundcheck.
On that way I use the dLive as a studio desk.

2018/12/29 at 10:10 am #81133

RS
Participant

Interesting point, loloverde.
I have to look into that if the IEM can be routed to the L/R bus, or a physical output only…

2018/12/29 at 10:21 am #81134

RS
Participant

No, physical outputs only.
So this is of no help for me, as my PA system is driven by several Matrixes fed by the L/R bus.

Or I don’t find the necessary function you are talking about?

2018/12/29 at 11:17 am #81135

mixJM
Participant

As a workaround you can patch the IEM output to the PA for the virtual soundcheck.

I use matrixes for L,C,R, front fills, sub bases, out fills, etc.
I don’t think routing PAFL bus to this many matrixes would be practical, also it would bypass my LR Master where I use additional processing before sending the signal to those Matrixes.

2018/12/29 at 4:29 pm #81143

RS
Participant

@mixjm: you can not route the pafl to the Matrixes, but the corresponding output patches only. At least if I am not missing something.

But I get your point, as it has the same result what I mentioned above. Using the output patch will leave all the processing in the Matrix masters behind.

2018/12/29 at 10:13 pm #81149

alex.abel
Participant

+1 for Solo in place function
Author

Posts