Setting up QU 24 with Pro Tools 12 (Step by Step Instructions?)

[Songsmith StevieParticipant]

I was going to buy the AVID S3 for 5K to integrate with PRO TOOLS, but said wait a minute can’t my A & H do most of this stuff???? Just want to see if there is a way to use gear I have

I have this great QU 24 board that I was using live only and I have had this pro tools 12 which I have not really used (Scarltett interface 18i20) I want to use the QU as the desk and hub of my system, but cannot find any step-by step-by step ways to do this…

From setting up I/O’s etc, to how to get everything to lock. To recording and playback….everything….

Are there any STEP BY STEP instructions to set this up completely? I will no longer be using this live if I can do this

Also I cannot open up the DAW template on my Mac (don’t know if I need it)

HELPPPPPPPPPPPPP!!!

[Alex A&HKeymaster]

Hi Stevie,

You can find information for setting up the desk for audio recording here: https://support.allen-heath.com/Knowledgebase/Article/View/1142/201/how-do-i-route-audio-to-and-from-my-qu-mixer-and-the-daw

and DAW control here: https://www.allen-heath.com/media/DAW-Control-Setup-Notes-V1.40.pdf

Thanks!

Alex

[Author]

Posts