Seperate mix outs to in-ear monitors

Forums Forums Qu Forums Qu general discussions Seperate mix outs to in-ear monitors

This topic contains 6 replies, has 5 voices, and was last updated by Profile photo of gravyface gravyface 6 years, 5 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #65907
    Profile photo of Wave Mason
    Wave Mason
    Participant

    Hello. I’m new to the forum and the QU-16.
    I am trying to send different mixes to in ear monitors while a main mix to powered QSC monitors..
    In this case I want more guitar in my in ears whilst our vocalist wants less.
    What’s the correct way for doing this?
    I’ve created the 2 mixes and ran XLRs from the mix out puts 1 & 2 directly to our Shure transmitters. Strangely the mixes are still the same…?
    Apologies in advance if a similar question like this has already been answered.
    Thanks.

    #65910
    Profile photo of GCumbee
    GCumbee
    Participant

    You press Mix 1. Setup your first mix going to transmitter 1
    Then press Mix 2. Setup different mix there. Feed mix one out to second transmitter. That should work.

    #65913
    Profile photo of Dick Rees
    Dick Rees
    Participant

    What George said…

    Page 24 of the Manual: Working with Sends on Faders.

    Attachments:
    You must be logged in to view attached files.
    #65919
    Profile photo of SRD
    SRD
    Participant

    “Feed mix one out to second transmitter”.

    Should that not be mix 2 out to second TX?

    #65923
    Profile photo of GCumbee
    GCumbee
    Participant

    You are correct. Bad proof reading.
    Mix 2 out to transmitter 2.

    I wish this forum would allow infinite editing.

    #65957
    Profile photo of Wave Mason
    Wave Mason
    Participant

    Thanks guys. I had done just that but had my receiver on the wrong channel! *slaps forehead* Apologies.

    #65969
    Profile photo of gravyface
    gravyface
    Participant

    I use Mix 5/6, 7/8, and 9/10 stereo XLR out to three Behringer PowerPlay P1 headphone amps (only ones on the market I found that were stereo XLR in) for the three of us at rehearsal.

    I usually mix it for the boys from my Qu-Pad app, but they also will tweak “more me” parameters with the Qu-You app.

    Pretty nice.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.