pro tools dose NOT see audio from dante

Forums › Forums › GLD Forums › GLD troubleshooting › pro tools dose NOT see audio from dante

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of ranman ranman 6 years, 4 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2017/12/18 at 12:42 pm #66990
    Profile photo of ranman
    ranman
    Participant

    I have a dante card in my GLD connected to a pc running pro tools 11. I do have a mbox mini I use with no issues. I had to reinstall my OS on my PC a few months ago. since then I have not been able to get audio from the dante card. I have checked all my settings several times and cant figure it out. I’m running 48k at 24bit. the dante controller device view can see audio on CH 13 to 17 but pro tools can not see the audio. not sure what I am missing. take a look at the pictures. anyone have any ideas??? thanks.

    Attachments:
    You must be logged in to view attached files.
    2017/12/18 at 10:24 pm #67018
    Profile photo of SteffenR
    SteffenR
    Participant

    Dante controller is not seeing DVS?

    2017/12/21 at 1:44 pm #67075
    Profile photo of ranman
    ranman
    Participant

    I got it. dante controller was not seeing my pc. works great now.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.