ilive-t112 startup problem stuck on Allen and Heath logo

Forums › Forums › iLive Forums › iLive troubleshooting › ilive-t112 startup problem stuck on Allen and Heath logo

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of ddff_lv ddff_lv 7 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2017/03/24 at 8:52 pm #62325
    Profile photo of Randy
    Randy
    Participant

    Console gets stuck on the Allen and Heath screen and shows “no dlq after issuing millerite” see the following pictures before it gets to that screen. Can anyone help troubleshoot. Tried resetting the screen. Tried resetting the dip switches. Neither worked

    2017/03/25 at 10:45 am #62330
    Profile photo of ddff_lv
    ddff_lv
    Participant

    I gues that is bad sector on boot CF media. You can either clone the image of working desk (several versions exist, so it might work or not) or order spare from A&H- SBC data would be required in that case.

    ddff

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.