iLive Editor Assign

Forums › Forums › iLive Forums › iLive general discussions › iLive Editor Assign

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Larry/Mavrick Productions Larry/Mavrick Productions 9 years, 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2015/01/04 at 9:23 pm #44303
    Profile photo of Larry/Mavrick Productions
    Larry/Mavrick Productions
    Participant

    Helping a colleague working with a fixed format idr48 being controlled by iLive Editor and PL10’s. They want to take a group of inputs (i.e. A1-A4) assign them to a mono group (GP1) and have the group feed the LRM main outs. Group assignment is easy. But how do you assign (or unassign) an input from the main using the editor?

    On a surface it would be a matter of holding the assign button. But from the editor it’s not as clear.

    Appreciate the assist

    -Larry

    2015/01/04 at 9:44 pm #44305
    Profile photo of ddff_lv
    ddff_lv
    Participant

    While in main mix press ON for the channels you want to unassign. This is true for all mixes.

    ddff

    2015/01/04 at 9:51 pm #44307
    Profile photo of Larry/Mavrick Productions
    Larry/Mavrick Productions
    Participant

    That’s what I thought, but wanted to check and make sure. Thanks! -Larry

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.