Fx1 send on surface

Forums Forums GLD Forums GLD troubleshooting Fx1 send on surface

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Chris93 Chris93 8 years, 7 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #49646
    Profile photo of hopcazz
    hopcazz
    Participant

    So today i tested out some inserts fx on channels but as i uninserted it the fx return re appeared on the surface but the fx send did not return although on the configuration screen it showd it was there had to reset the desk to sort out the issue.

    Anyone with any ideas

    Thank you
    Carwyn

    #49650
    Profile photo of SteffenR
    SteffenR
    Participant

    we had a similiar situation on our iLive…
    the simple solution was that freece in layers was activated for an empty strip that was not empty before reconfiguring the mixer

    #49655
    Profile photo of hopcazz
    hopcazz
    Participant

    Is there a fix to this If it happens again

    #49662
    Profile photo of Chris93
    Chris93
    Participant

    I’m not sure if this is your problem or if it still works this way, but around two years ago it was the case that the FX sends and returns could not be strip assigned onto the desk if they were not patched as the send / return paths for their respective FX engines.

    Chris

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.