DCA to USB

Forums › Forums › Qu Forums › Qu DAW integration › DCA to USB

Tagged: , ,

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of MarkPAman MarkPAman 6 years, 3 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2018/01/13 at 10:19 am #68190
    Profile photo of Macdalor
    Macdalor
    Participant

    Hi,

    Am I misunderstanding the concept of DCA thinking they can be routed to USB like the groups do? If not is this at all possible on the QU24? I can for the life of me figure it out.

    Same question for the FX sends, how can they be routed to USB?

    Thx

    2018/01/13 at 11:01 am #68191
    Profile photo of MarkPAman
    MarkPAman
    Participant

    A DCA is just a remote control of whatever faders you’ve assigned to it. There is nothing to route. It’s just a level but no sound.

    Effects sends are “hard-wired” to the effects units, on Qu (and I believe most other digital desks) they are not available as an output from the desk.

    2018/01/13 at 11:48 am #68192
    Profile photo of Macdalor
    Macdalor
    Participant

    Thx Mark, that’s what I thought…A shame FXs returns cannot be sent to USB…maybe a future firmware update from Allen&Heath 🙂

    2018/01/13 at 12:47 pm #68195
    Profile photo of MarkPAman
    MarkPAman
    Participant

    FX returns can be sent to USB. You’ll probably need to repatch them in the I/O routing screen, as they’re not the default setting.

    FX sends, can’t.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.