Copy main mix levels and pan to an aux send

Forums Forums dLive Forums dLive feature suggestions Copy main mix levels and pan to an aux send

This topic contains 9 replies, has 7 voices, and was last updated by Profile photo of ThatComplicatedMidiGuy ThatComplicatedMidiGuy 5 years, 8 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #69036
    Profile photo of mixJM
    mixJM
    Participant

    Copy main mix levels and pan to an aux send.
    Useful feature.
    It’s already possible to copy aux mixes. Why not the main mix to an aux?

    #69132
    Profile photo of Lishinsky
    Lishinsky
    Participant

    +1

    #69134
    Profile photo of Lishinsky
    Lishinsky
    Participant

    i also think that an option for the aux pans to follow main pans is a must have!!

    #69516
    Profile photo of MasterLufier
    MasterLufier
    Participant

    aux pan follow main sometimes is needed for monitor engineers when they are working with big band in iem.

    #69532
    Profile photo of Wolfgang
    Wolfgang
    Participant

    I am very glad that aux-panning has nothing to do with main-panning.
    if you want to change this, there must be an appropriate choice.

    #69610
    Profile photo of mixJM
    mixJM
    Participant

    I tried sq5 today. You can copy main mix to an aux mix on sq5!

    #71615
    Profile photo of Senny
    Senny
    Participant

    This feature is address in the 1.70 firmware.

    #72364
    Profile photo of Marko
    Marko
    Participant

    How is Aux sends available to copy? I’m just out a show with 10 IEMs. Had to move 80 channels for each send.

    #72423
    Profile photo of Wolfgang
    Wolfgang
    Participant

    using the Copy / paste function and the MIX buttons.

    an example:
    copy the Aux1-mix:
    -> press “Copy” and then together “MIX” from Aux1

    copy this mix to Aux2:
    -> press “Paste” and then together “Mix ” from Aux2

    you have copied the mix from Aux1 to Aux2

    #72537

    Pan-linking is also available in 1.7: Select a mix bus, go to routing, see “Follow Main Pan.”

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.