Bluetooth audio streaming through Qu-Drive

Forums › Forums › Qu Forums › Qu general discussions › Bluetooth audio streaming through Qu-Drive

Tagged: ,

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of GaryW GaryW 6 years, 10 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2017/06/18 at 8:06 pm #63933
    Profile photo of JamieF
    JamieF
    Participant

    Hi there,

    Just curious if anyone has tried streaming Bluetooth audio to a USB Bluetooth receiver through the QU-Drive port? Not sure if it’s possible but would free up all the other channels on the board for other inputs.

    Thanks!

    2017/06/18 at 8:15 pm #63934
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Input through USB won’t be possible. Having a USB powered receiver with a 3.5mm output to ST3 could work

    2017/06/19 at 1:05 pm #63949
    Profile photo of Dave
    Dave
    Participant

    There is not much need to bring usb into the picture since most if not all bluetooth receivers have 3.5 mm audio jacks.

    2017/06/21 at 5:29 am #63962
    Profile photo of GaryW
    GaryW
    Participant

    As an alternative thought, I use an Apple Airport Express and run a TOSlink cable through to a small spare DAC I have.
    Airplay is ALAC (Apple’s compressed lossless audio), which from my own listening experiences sounds better than Bluetooth audio. Of course everyone’s mileage varies.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.