AR2412 channel noise issue on GLD and QU

Forums Forums GLD Forums GLD troubleshooting AR2412 channel noise issue on GLD and QU

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mrvoltz Mrvoltz 6 years, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #60284
    Profile photo of TheSoundDude
    TheSoundDude
    Participant

    Hello folks,
    While setting up my new GLD80 (I own a QU24 as well), I noticed channel 10 emitting a scratchy, loud and also intermittent sound regardless of a mic connected or not. I tested the AR with my GLD and my QU and the noise showed up on channel 10 of both mixers when connected with the CAT 5. So, do I have a blown preamp or does anyone have a suggestion? I appreciate any help!

    Thanks, Tedd

    #65118
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    I know this is an old post and I Hope you got this resolved, but here is my two cents.
    The fact that it is the same channel on both boards I would say you have a hardware problem.
    If it moved around or was on multiple channels I would suspect the cable first, make sure it is a Cat 5E or Cat 6 STP (shielded twisted pair).

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.